Liquid examples:
Chemical industry:
acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc.
Cosmetics industry:
creams, soaps, toothpaste, shampoos and raw materials for soaps.
Confectionery industry:
honey, syrups and preserves.
Paint and lacquer factories:
paints, lacquers and pastes
Food industry:
milk, whey, cheese, spread and ketchup.
Mineral oil industry:
high-viscosity oils and fluid greases
Features:
- For shear sensitive and sticky liquids from 1- 30.000 cps (1- 30.000 mPas)
- Positive displacement pump with planetary gear according to eccentric screw principle
- Suitable for all Lutz universal motors and compressed air motors
- Easy detachable pump tube
- Explosion-proof version available
Benefit
- Smooth flow
- Constant volumetric flow
- Quiet operation
- Easy handling
- Easy to clean
- Minimum wear
Sealing system:
Mechanical seal (MS) or packing gland (St)
Drive shaft :
Torsion shaft (TS) or universal joint shaft (UJ)
Immersion length:
39″ (1000 mm)
B70V-SR (Ex) pump tubes are “Zone 0” approved in combination with the original Lutz motors ME I 6 Silver Star (Ex) / MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use in hazardous locations.
Motors
Motor B 36 / MI 4
Motor B 36-SC / MI 4 E
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Optionally with infinitely variable speed controller for a controlled flow rate
- Internally ventilated
- 110-120 V / 60Hz,
640 W / 0.85 HP
- Open drip proof in accordance with protection class IP 24, double insulated, 16′ (5 m) cord and plug
Motor B 28
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Internally ventilated
- 110-120 V / 60Hz,
800 W / 1.07 HP
- Open drip proof, double insulated, 16′ (5 m) cord and plug
Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.
- Robust and powerful
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 110-120 V / 60Hz,
510 W / 0.68 HP (B 55-T-5)
700 W / 0.93 HP (B 55-T-7)
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16′ (5 m) cord and plug
Motor ME I 6 (Ex) Silver Star
A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.
- Extremely rigid aluminium casing, robust high-power motor
- Electronic speed control to constantly ensure the right flow rate
- Separate ON/OFF buttons with low voltage release for safety and ease of handling
- 120 V / 60Hz
640 W / 0.85 HP
- Splash-proof in accordance with protection class IP 54, 16′ (5 m) cord, optionally with remote operating kit.
Motor MD-1 / MD-2
Compact compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Optionally with (MD-2) / without (MD-1) manual operation
- Delivery flow is easy to control
- 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)
Motor 4/GT
Light, easily handled compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Delivery flow is easy to control
- 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)
Motor MA II 3-12V
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Robust and powerfull
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 12 V DC,
260 W / 0.35 HP
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10′ (3 m) cord with alligator clips