Liquid examples:
Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.
Features:
- Suitable for highly corrosive chemicals in non-explosive areas
Optional with electric or air driven motors
- No grease fillings
- Optimized drum drainage
- Modular, service friendly design
Benefit
- Sealless version cannot fail by dry running
- Non-lubrictated, thus no contamination of the liquids pumped
- All-purpose resistant PTFE shaft bearing
- Two impeller geometries for a tailored pump characteristic
- Easy maintenance without special tools
- Sealing modules of mechanical sealed (MMS) resp. of sealless (MSL) pumps are replaceable
Sealing system:
Sealless construction (SL)
Type of impeller:
Axial-flow rotor (R) for high delivery rate.
Immersion length:
39″ (1000 mm) and 47″ (1200 mm)
(Special length on request)
Motors
Motor B 36 / MI 4
Motor B 36-SC / MI 4 E
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Optionally with infinitely variable speed controller for a controlled flow rate
- Internally ventilated
- 110-120 V / 60Hz, 640 W / 0.85 HP
- Open drip proof in accordance with protection class IP 24, double insulated, 16′ (5 m) cord and plug
Motor B 28
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Light and convenient
- Internally ventilated
- 110-120 V / 60Hz, 800 W / 1.07 HP
- Open drip proof, double insulated, 16′ (5 m) cord and plug
Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.
- Robust and powerful
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 110-120 V / 60Hz,
510 W / 0.68 HP (B 55-T-5)
700 W / 0.93 HP (B 55-T-7)
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16′ (5 m) cord and plug
Motor MD-1 / MD-2
Compact compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Optionally with (MD-2) / without (MD-1) manual operation
- Delivery flow is easy to control
- 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm3/min.)
Motor 4/GT
Light, easily handled compressed air motor for handling neutral and aggressive liquids.
- Overload-proof
- Delivery flow is easy to control
- 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm3/min.)
Motor MA II 3-12V
Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.
- Robust and powerfull
- Double wall housing protects inner parts from corrosion
- Externally ventilated
- 12 V DC, 260 W / 0.35 HP
- TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10′ (3 m) cord with alligator clips
Motor B 4/GT
Reliable and persistant three-phase gear motor suitable for pumping thin-bodied to slightly viscous liquids in plant construction and stationary use.
- Robust and durable
- Especially smooth and quiet operation
- Long maintenance intervals
- 230/440 V / 60Hz
750 W / 1.0 HP
- TEFC splash-proof in accordance with protection class IP 54