Skip to content

ToughSonic 50

Maximum Range 50 feet (15.2 Meters)

ToughSonic 50 ultrasonic sensors have a maximum range of 50 feet (15.2 meters). Like all Toughsonic sensors, they are built for durability and ease of use in tough industrial environments. ToughSonic 50s are fully immersible, corrosion resistant, shock resistant and all around tough. They are also fully configurable with ultrasonic sensors with stainless steel housings SenixVIEW software.

ToughSonic 50s are available in three different housings, each with either RS-232 or RS-485 serial interfaces. These 9-wire sensors allow up to six simultaneous serial, analog and/or switch outputs. These workhorse sensors are used around the world in remote liquid level applications and harsh factory environments.

ToughSonic 50 Options

Housing

The ToughSonic 50 is available in three different housings. All sensor features are available with any housing

Standard

Our Standard Model (TSPC-21S) comes in a 2.1 inch (53.34 millimeter) smooth 316 stainless steel housing for easy clamping.

Rear Mount

The Rear Mount Model (TSPC-21SRM) adds a stainless steel end cap with 1.5 inch NPT threading to the 2.1 inch smooth standard housing.

PVC Model

The PVC Model (TSPC-25P) is packaged in a 2.5 inch PVC housing with 2.5 inch NPT threading on either end for tank level applications.

Serial Interface

The ToughSonic 50 is available with one of the following Modbus serial data interfaces.

RS-232
Modbus RS-232 serial data interface

RS-485
Modbus RS-485 serial data interface

Sensor Customization
  • Custom SenixVIEW configurations can be pre-loaded.
  • Alternative cable type, length and connections are available.

Our ToughSonic ultrasonic sensors offer extraordinary features and flexibility. If you need sensor capabilities that are not listed here, please contact us.

Tough:

ToughSonic ultrasonic sensors are built Tough with:

  • Type 316 stainless steel housing (except PVC model).
  • Sealed epoxy potting for wet and dirty applications.
  • Ruggedized piezoelectric ultrasonic transducer, potted in place.
  • Hardened ToughSonic solid state internal electronics.
  • UV resistant, potted-in, 9-wire cable.
  • Short and overload protected input / output.
:Smart

ToughSonic ultrasonic sensors are built Smart with:

  • SenixVIEW configuration and analysis software controls more than 60 performance parameters and dozens of viewing, analysis and maintenance options.
  • Multi-sensor network capable.
  • Up to six simultaneous, industry standard outputs.
Specifications
Maximum Range 50 feet (15.2 meters)
Optimum Range 1 foot – 33 feet (30.5 centimeters – 10 meters)
Temperature -40º to 158º F (-40º to 70ºC)
Humidity 0 to 100% operating
Protection NEMA-4X, NEMA-6P, IP68
Transducer Ruggedized piezoelectric
Compensation Temperature compensated
Resolution Digital: 0.0135 in. (0.3438 mm); Analog steps: 4099 (0-10 VDC), 3279 (4-20 mA)
Repeatability Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate 5 Hz (200 ms), SenixVIEW adjustable; affected by SenixVIEW filter selections

Specifications are subject to change without notice.

Outputs
Voltage Output 0-10, 0-5 VDC or SenixVIEW customized; 10 mA max.
Current Loop #1 Current sourcing 4-20 mA or SenixVIEW adjustable, max. loop 450Ω
Current Loop #2 Current sinking 4-20 mA or SenixVIEW adjustable, max. loop 450Ω
Sinking Switch 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication
Sourcing Switch 150 mA max. @ input voltage, teachable set point & polarity, fault indication
RS-232, RS-485 Modbus protocol, 9600-115200 baud (selectable), 8 data bits, 1 stop, no parity
SYNC feature Permits up to 32 sensors to operate in close proximity without interference
Mechanical
Mounting 2.3 inch clamp, 1.5 inch NPT or 2.5 inch NPT
Attached Cable 6.5 feet (2 meters)
Total Weight 22.6 oz. (0.64 kg)


ToughSonic 50 with smooth standard housing


ToughSonic 50 with rear mount with 1.5 inch NPT

ToughSonic 2.5 inch PVC with 2.5 inch NPT